Mercedes Comand NTG4.5 Multimedia Video Interface W204 W212 C/ML/E/GLK Class 2011>

Watch any video source on your factory NTG4.5 screen

Our car multimedia interface is a revolutionary product that allows you to integrate an external video source to your cars factory fitted screen. Once connected, it gives you the ability to connect an in car DVD player, games console such as a PS3 or XBOX 360, iPod video, digital TV tuner, rear view camera, car navigation GPS etc to keep passengers entertained.

The multimedia interface has a total of 2 AV inputs, rear camera input, AV out and RGBS connection to add satellite navigation if you do not already have the factory fitted option. The interface does not replace your original system; it offers perfect integration to maintain your OEM appearance. The CAN-BUS enables you to switch video input using the head unit controls.

Features:

• 2 AV inputs which enable you to watch any video source on your factory fitted screen
• Automatic switching to rear view camera when reverse gear is selected
• Switch video inputs by using the
• High quality image processor enables the image to be displayed on the screen without any distortion or picture cropping
• Frame buffer offers very stable timing to the panel even under poor video signal conditions

Included with the kit:

• Mercedes NTG4.5 multimedia video interface
• LVDS monitor cable
• CAN box and wiring
• Audio IN & OUT cables
• Toggle switch
• User manual

Compatibility:

The interface is compatible with Mercedes vehicles from 2011 onwards with the NTG4.5 Comand System. It is suitable for both the 5 inch and 7 inch screens with the round Fakra connector.

·    B-Class (W246) 2011>

·  C-Class (W204) 2011>

·  E-Class (W212) 2011>

·  E-Class Coupe (C207) 2011>

·  CLS-Coupe (C218) 2011> Onward

·  GLK-Class (W204) 2011>

·  ML-Class (W166) 2011>

·  SLK-Class (R172) 2011>

·  SL-Class (R231) 2012>

Installation:

All installation is done behind the monitor. You will need to disconnect the power and monitor cables from the back of the screen. Simply replace these connections with the cables supplied and attach the original cables to the connections provided. If you are installing a rear view camera, you will need to connect a wire to 12v reverse so that the interface automatically switches the screen to this input when in reverse gear. Simply connect the video inputs and the installation is complete!

Audio:

This interface is designed for video only. For audio, you will need to connect the audio out connection from the interface to your AUX input.

Money back guarantee:

We have extensively tested this product and confident that it will work with all factory fitted systems in the car models listed below. You do not need have a factory installed TV tuner or have anything enabled by a Mercedes dealer. Nor do you have to have to have any optional extras installed when the car was ordered. If for any reason you are not completely satisfied or have any issues with compatibility you can return it to us for a refund.

Specification:

RGB video amplitude:  0.7Vpp with 75 ohm impedance
Sync amplitude in RGB port: 3-5Vpp with 5K Ohm impedance 
Video input format: NTSC
Power consumption: 2.4W [0.2A @12V]
Standby current: <5mA
Standby start: 10 seconds after CD unit is turned off
Reverse trigger threshold: >5v trigger